Ghost Guns in New Jersey: Unserialized Firearms, Parts Kits and 3D Printing

Reviewed by William A. Proetta, Esq. · Updated November 2026

A “ghost gun” is a firearm with no serial number tying it to a licensed manufacturer. Most are assembled at home from an unfinished frame or receiver, sold online as an “80% lower” or a complete parts kit, or printed on a 3D printer. Some states allow some of this. New Jersey does not. Possessing one is a third-degree crime, building one or buying the parts to build one is a second-degree crime, and since January 2026 even holding the digital files with intent to print a gun can be charged.

This page walks through each ghost gun offense, the penalties, the charges that tend to come with them, and how these cases are defended. For the full list of weapons New Jersey bans outright, see prohibited weapons and devices.

Ghost Gun Offenses at a Glance

Conduct Statute Grade
Possessing a firearm made from a frame or receiver without a registered serial number N.J.S.A. 2C:39-3(n) Third degree
Buying or obtaining an unserialized frame, receiver or parts kit to build a firearm, without a manufacturer’s license N.J.S.A. 2C:39-9(k) Second degree
Using a 3D printer to make a firearm, receiver, magazine or component without a manufacturer’s license N.J.S.A. 2C:39-9(l) Second degree
Distributing 3D-printing code for firearms to an unlicensed person in New Jersey N.J.S.A. 2C:39-9(l) Second degree
Possessing firearm digital instructions with intent to manufacture a firearm without a license N.J.S.A. 2C:39-3(o) (P.L.2025, c.255) Fourth degree

How New Jersey Defines an Unserialized Firearm

“Ghost gun” is a popular term, not a statutory one. The statutes focus on the frame or receiver, the part federal law treats as the firearm itself and the part that normally carries the serial number. The question in every case is whether the gun was manufactured or assembled from a frame or receiver that is not imprinted with a serial number registered with a federally licensed manufacturer. A gun that was serialized and later had its number removed is a different problem, charged as defacing a firearm.

New Jersey first went after homemade guns in P.L.2018, c.138, which targeted buying parts to build an unserialized firearm, 3D printing guns without a license, and undetectable firearms. A separate possession offense now sits in 2C:39-3(n), and P.L.2022, c.53 made the parts and 3D-printing offenses second-degree crimes.

Possessing a Ghost Gun: Third Degree

Under 2C:39-3(n), it is a third-degree crime to knowingly possess a firearm built from an unserialized frame or receiver, including one assembled from parts bought in violation of 2C:39-9(k). The range is 3 to 5 years in state prison and a fine of up to $15,000. It does not matter that you hold a Firearms Purchaser Identification Card, a permit to carry, or that the gun never left your house. A valid FID and an unserialized gun in the safe is still a third-degree charge.

Building a Ghost Gun or Buying the Parts: Second Degree

Under 2C:39-9(k), a person who is not registered or licensed as a manufacturer commits a second-degree crime by buying or otherwise obtaining an unserialized frame or receiver, or a set of parts from which an unserialized firearm can readily be made, with the purpose of manufacturing or assembling a firearm. A second-degree conviction carries 5 to 10 years in prison and a fine of up to $150,000, and the statute provides that this offense does not merge with other convictions, so it can be sentenced separately from a possession count.

Many of these cases start with a shipment of parts to a New Jersey address, which is why the charge can arrive before any gun has been built.

3D-Printed Guns and Gun Files

Under 2C:39-9(l), it is a second-degree crime for an unlicensed person to use a 3D printer or similar device to make a firearm, firearm receiver, magazine or firearm component. Distributing digital code that programs a 3D printer to make those items to someone in New Jersey who is not a licensed manufacturer is also second degree.

P.L.2025, c.255, approved on January 12, 2026, added 2C:39-3(o). It makes it a fourth-degree crime for an unlicensed person to knowingly possess firearm digital instructions, such as computer-aided design files or printer code, with the intent to use them to manufacture a firearm, receiver, magazine or component. A fourth-degree crime carries up to 18 months in prison and a fine of up to $10,000. The intent element is the battleground: a file on a hard drive, without more, is not the offense.

Charges That Usually Come With a Ghost Gun Case

An unserialized gun is still a firearm, so the ordinary weapons statutes apply on top of the ghost gun counts:

  • Unlawful possession of a handgun under 2C:39-5(b) if the gun was carried outside the home without a permit, a second-degree crime subject to the Graves Act mandatory minimum.
  • Certain persons not to have weapons under 2C:39-7 for anyone with a disqualifying prior conviction.
  • Large-capacity magazines and assault firearm features, which are separate counts. See assault firearms and weapon definitions.

Because the parts offense does not merge, one search can produce a stack of second- and third-degree counts. Early attention to which counts are legally sound is often what keeps the exposure manageable.

How Ghost Gun Charges Are Defended

  1. Knowledge and possession. The State must prove you knowingly possessed the item. Shared homes, shared cars and packages addressed to someone else all raise real questions.
  2. Purpose and intent. The parts offense requires a purpose to build a firearm, and the digital-file offense requires intent to manufacture one. Buying a part is not the same as intending to finish it.
  3. What the item actually is. Whether a piece of metal or polymer is legally a frame or receiver, and whether a device is operable, can be contested with expert testimony.
  4. The search. Many cases begin with intercepted packages, warrants for a home or extractions from a phone or computer. A successful motion to suppress can remove the evidence entirely.

If you were stopped with a firearm in a car, see what to do when stopped with a gun.

Frequently Asked Questions

Are ghost guns illegal in New Jersey?

Yes. Knowingly possessing a firearm built from a frame or receiver that has no serial number registered with a federally licensed manufacturer is a third-degree crime under N.J.S.A. 2C:39-3(n), even for someone who could lawfully own a serialized gun.

Is it legal to buy an 80% lower or a parts kit in New Jersey?

Not for someone who is not registered or licensed as a manufacturer and intends to build a firearm. Buying or obtaining an unserialized frame, receiver or parts kit for that purpose is a second-degree crime under N.J.S.A. 2C:39-9(k).

Is it illegal to 3D print a gun in New Jersey?

Yes, without a manufacturer’s license. Using a 3D printer or similar device to make a firearm, receiver, magazine or firearm component is a second-degree crime under N.J.S.A. 2C:39-9(l).

Can I be charged just for having 3D gun files?

Since P.L.2025, c.255 was approved on January 12, 2026, an unlicensed person who knowingly possesses firearm digital instructions with the intent to manufacture a firearm, receiver, magazine or component commits a fourth-degree crime. The State must prove that intent; the file alone is not the offense.

Does an FID card or carry permit make a ghost gun legal?

No. The possession offense in 2C:39-3(n) applies regardless of whether you hold a Firearms Purchaser Identification Card or a permit to carry. The problem is the missing serial number, not the owner.

Talk to Us About a Ghost Gun Charge

Ghost gun cases carry second- and third-degree exposure and are often built on searches that deserve a hard look. If you have been charged, or police have seized parts, a printer or a computer, call William Proetta Criminal Law. We defend weapons cases throughout New Jersey from offices in Jersey City and Edison, and we can tell you where your case stands and what comes next.